KidKraft BROCKWELL Installation And Operating Instructions Manual page 29

Step 6: Join Swing and Slide Wall Assemblies
Part 4
G: On the inside of the assembly attach (041) Narrow Back Panel to (052) Back Wall Panel using 2 Flat Panel
Brackets in the places shown with 4 (S8) #12 x 3/4" Pan Screws per bracket. (fig. 6.8 and 6.9)
H: Repeat Step G to attach (042) Narrow Front Panel to (051) Front Wall Panel. (fig. 6.8 and 6.9)
I: At all four corners, both top and bottom, attach 1 Panel Corner Bracket with 4 (S8) #12 x 3/4" Pan Screws per
bracket. Brackets to be flush to the top and bottom of the panels. (fig. 6.8 and 6.10)
Fig. 6.8
Fig. 6.9
Inside View
Back Wall
041
042
Flat Panel
Bracket
x 2 per wall
S8
x 4 per
bracket
48 x
Front Wall
Fig. 6.10
Inside View
S8
x 4 per
bracket
Hardware
#12 x 3/4" Pan Screw
S8
29
052
051
Flush
Other Parts
4 x Flat Panel Bracket
8 x Panel Corner Bracket
Panel
Corner
Bracket
x 2 per wall