Advertisement
Step 36: Back Gable Assembly
Part 2
C: Turn the Roof Assembly over so the Back side is on
the bottom. Place (361) BK Centre Gable on top of (360)
Back Gable Support and on both (340) Roof Rafters,
tight to the peak, then attach with 2 (S20) #8 x 1-3/8"
Wood Screws. (fig. 36.3, 36.4 and 36.5)
D: Place (362) Starburst Centre centred under (361)
BK Centre Gable, tight to the top of (360) Back Gable
Support then attach (361) BK Centre Gable to (362)
Starburst Centre with 1 (S20) #8 x 1-3/8" Wood Screw.
(fig. 36.3, 36.4 and 36.5)
E: Place 1 (363) Sunburst Side tight to each side of
(361) BK Centre Gable and to the top of (360) Back
Gable Support then attach to (362) Starburst Centre with
1 (S20) #8 x 1-3/8" Wood Screw per board. (fig. 36.3,
36.4 and 36.5)
F: Attach (361) BK Centre Gable and both (363)
Sunburst Sides to the (340) Roof Rafters with 2 (S20) #8
x 1-3/8" Wood Screw per board. (fig. 36.4)
Fig. 36.5
Inside View
340
Wood Parts
1 x
BK Centre Gable 1 x 6 x 19"
361
1 x
Starburst Centre 5/4 x 6 x 12"
362
2 x
Sunburst Side 1 x 5 x 10"
363
363
S20
x 11
361
11 x
Fig. 36.3
Inside View
Fig. 36.4
Outside View
363
Tight
363
Hardware
#8 x 1-3/8" Wood Screw
S20
83
Back
361
Tight
362
Tight
360
362
363
360
340
Advertisement
