Advertisement
Step 6: Join Swing and Slide Wall Assemblies
Part 3
E: From outside the assembly, place 1 (062) Roof Support against (041) Narrow Back Panel and (052) Back
Wall Panel so it sits 3/4" above the panels and has approximately 3-1/16" overhang at each corner then attach
with 3 (WB8) 5/16 x 2-3/8" Wafer Bolts (with flat washer and t-nut) . (fig. 6.6 and 6.7)
F: Repeat Step E to attach 1 (062) Roof Support to (042) Narrow Front Panel and (051) Front Wall Panel. (fig.
6.6 and 6.7)
Back Wall
Fig. 6.6
Fig. 6.7
Inside View
Approx
3-1/16"
062
Wood Parts
2 x
Roof Support 1-1/4 x 3 x 72"
062
Front Wall
WB8
Hardware
6 x
5/16 x 2-3/8" Wafer Bolt
WB8
(5/16" flat washer, 5/16" t-nut)
28
5/16" Flat
Washer
5/16"
T-Nut
052
041
3/4"
Advertisement
