Advertisement
Step 35: Roof Assembly
Part 2
C: Place 1 Roof Rafter Assembly against one side so the peaks meet and the ends of the roof supports are flush
with the ends of the roof panels. Attach with 8 (S11) #8 x 2" Wood Screws. (fig. 35.4)
D: Attach the second Roof Rafter Assembly on the opposite side, peaks to meet and ends are flush with 8 (S11)
#8 x 2" Wood Screws. (fig. 35.4)
Fig. 35.4
Flush
351
Flush
Roof Rafter
Assembly
S11
S11
Hardware
16 x
#8 x 2" Wood Screw
S11
81
Flush
350
Flush
Advertisement
