Advertisement
Step 23: Crowsnest Wall Assembly
A: Tight to each (201) Upright Crowsnest and tight to the floor and gap boards attach 1 (230) Cedar Wall to each
(210) Crowsnest Bottom Side and (212) Crowsnest Side with 4 (S33) #8 x 1" Wood Screws per board. (fig. 23.1)
B: Measure 2-1/4" from each (230) Cedar Wall then attach another (230) Cedar Wall per side, tight to the floor
and gap boards using 4 (S33) #8 x 1" Wood Screws per board. (fig. 23.1)
C: If you purchased a Brockwell refer to Step 46, once completed return to Step 34 and continue.
212
Bevelled edges
facing out.
230
210
S33
x 4 per
board
Wood Parts
4 x
Cedar Wall 1 x 4 x 29"
230
201
Tight
Hardware
16 x
S33
#8 x 1" Wood Screw
65
Fig. 23.1
201
212
Tight
230
210
Advertisement
