Advertisement
Step 14: Swing Beam Assembly
Part 2
E: On the Fort End of (140) Engineered SW Beam attach 2 Heavy Flat Brackets with 2 (G21) 5/16 x 3-3/4"
Hex Bolts (with 2 flat washers and 1 lock nut). (fig. 14.6 and 14.7)
F: Place (141) SW Mount in between both Heavy Flat Brackets and place 1 Heavy L-Bracket against (140)
Engineered SW Beam and (141) SW Mount. Attach with 1 (G17) 3/8 x 6" Hex Bolt (with 2 flat washers, plastic
formed washer and lock nut). (fig. 14.8)
G: Attach (141) SW Mount to Heavy Flat Brackets with 2 (G21) 5/16 x 3-3/4" Hex Bolts (with 2 flat washers
and 1 lock nut). (fig. 14.9)
G21
Fig. 14.7
5/16" Flat
Washer
Heavy
Flat
Bracket
5/16" Flat
Washer
5/16"
Lock Nut
3/8" Flat
Washer
Plastic
Formed
Washer
140
Fig. 14.8
3/8" Flat
Washer
Wood Parts
1 x
SW Mount 4 x 4 x 16"
141
140
141
3/8"
Lock Nut
G17
4 x
1 x
Fort End
5/16" Flat
Washer
G21
Heavy
L-Bracket
Hardware
5/16 x 3-3/4" Hex Bolt
G21
(5/16" flat washer x 2, 5/16" lock nut)
3/8 x 6" Hex Bolt
G17
(3/8" flat washer x 2, plastic formed washer & 3/8" lock nut)
47
Fig. 14.6
140
141
5/16" Flat
5/16"
Washer
Lock Nut
Heavy Flat
Bracket
Other Parts
2 x Heavy Flat Bracket
1 x Heavy L-Bracket
Fig. 14.9
Advertisement
