Operating Requirements - ABB IRB 760 Product Specification

1.3.2 Operating requirements

Protection standards
Manipulator IP67.
Explosive environments
The robot must not be located or operated in an explosive environment.
Ambient temperature
Description
Manipulator during operation
For the controller
Complete robot during
transportation and storage
For short periods (not ex-
ceeding 24 hours).
a. At low environmental temperature < 10
warm-up phase recommended to be run with the robot. Below 5
phase is mandatory. Otherwise there is a risk that the robot stops or run with lower
performance due to temperature dependent oil- and grease viscosity.
Relative humidity
Description
Complete robot during operation, transportation and
storage
Product specification - IRB 760
3HAC039612-001 Revision: R
Standard/Option
Standard
Standard/Option
Standard
Standard
© Copyright 2021 ABB. All rights reserved.
1 Description
1.3.2 Operating requirements
Temperature
a)
0°C (32°F) to +50°C (122°F)
See Product specification - Controller
IRC5 with FlexPendant
-25°C (-13°F) to +55°C (131°F)
up to +70°C (158°F)
o
C is, as with any other machine, a
o
Relative humidity
Max. 95% at constant temperature
C this warm-up
17