Network Settings - American Dynamics Illustra Flex series User Manual

3.2.2 Network Settings

Below explains how to configure a wired network connection for the unit.

Camera Name: Enter a desired camera name or use the default name.

DHCP: If selected, the unit will automatically obtain an available dynamic IP address from the DHCP
server each time it connects to the LAN.

IP Address: Manually input IP address when DHCP off selected.

Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured,
the unit may not be able to communicate with other devices on the network.

Default Gateway: Leave blank as default setting. It is not necessary to enter Default Gateway if it is not
used. Ask your Network Administrator for Default Gateway information.

Primary DNS: (same as above)

Secondary DNS: (same as above)

UPnP: When set to "ON", the unit can be detected automatically by any computer in the LAN to skip the
installation of Illustra Connect.

OSD: When set to "ON", the camera name can be show on the screen.
F 3-23: N
IGURE ETWORK
32
Illustra Flex 1MP & 3MP Box Camera
S
ETTINGS