Supported Controllers And Matrix Switching Systems - American Dynamics SpeedDome Optima Quick Reference Manual

Supported Controllers and Matrix Switching Systems

SpeedDome Optima may be used with the following controllers and matrix switching systems. See notes below for specific limitations or restrictions.
VM16 /
ADTT16 VM32 /
Feature Series AD32 Series
SensorNet SensorNet
Supported
Protocols
Maximum
Available 96
Presets
Maximum
Available 3
(4)
Patterns
DirectSet
Yes (7)
(5)
menu
NOTES:
(1) For the list of compatible keyboards, see Supported AD Keyboards on page 5.
(2) RS-422 is supported with the appropriate code converter.
(3) Preset information is stored at the host, not the dome.
(4) Patterns are limited by time and the number of available dome commands. Total time for the patterns cannot exceed 6 minutes 50 seconds.
Total number of dome commands used in the patterns cannot exceed 99.
(5) Although text overlay is not supported, the following DirectSet menu commands are supported: Return to Auto Iris/Focus, Flip, Peel and Dome
Reset. See DirectSet Menu Commands on page 3 for more information.
(6) If the RS-422 Code Converter is used, only 16 presets are supported.
(7) Requires firmware version 0701-2833-0103 (EEPROM) / 0701-2834-0201 (Flash) or newer.
(8) Requires a compatible keyboard with a DirectSet key (ADCC0200 or ADCC0300).
RASO AND RASI SERIES SPEEDDOME OPTIMA
QUICK REFERENCE GUIDE
AD2150 /
VM96 AD2350
(1, 2)
Series
RS-422 Manchester
SensorNet RS-422
64 Manchester
(3)
96 Unlimited
16 RS-422
3 3 3
No No No
MegaPower
LT AD1650
MegaPower
(1, 2)
(1, 2)
48
SensorNet Manchester Manchester
RS-422 RS-422
SensorNet
64 Manchester
64 Manchester
96
96 RS-422 (6)
16 RS-422
96 SensorNet
3
3
Yes (8) Yes (8)
4 of 8
AD168 AD2050
(1, 2) (1, 2)
Manchester Manchester
RS-422 RS-422
SensorNet
64 Manchester
64 Manchester
64 RS-422 (6)
16 RS-422
64 SensorNet
3 3 3
No No No
AD
MegaPower
(1, 2)
1024
Manchester
RS-422
64 Manchester
16 RS-422
3
No
8000-2692-13, REV. C