ABB ACS880+N5350 User Manual page 92

De-Ice Selection

Select the I/O or Communication Link that will
Enable De-Ice mode
Backup

Copies all settings into a backup file stored in the
control panel. Press
to begin the Backup.
Backup Status

A status screen indicates progress.

Press (back) to backout and exit to home menu.
Check the positions of jumpers J1 and J2 on the control unit of the drive. These jumpers determine whether

analog inputs AI1 and AI2 are current or voltage.
3AXD50000011888
Table 12-2 Drive Assistant
to highlight Backup and
Control Signal Settings
Local CTDD
75.01 De-Ice Selection
[0] DISABLE
[1] DI01
[2] FBA
[3] EFB
Cancel 00 00
Local CTDD
Make backup?
Copies all settings into a backup file
stored in the control panel. To restore
a backup, go to Menu > Backups.
Not now
Backup
Back 00:00
Local CTDD
Backing up data from drive
Remote CTDD
Set-up complete
I/O should be connected as follows:
Start/Stop: Digital Input DI 1
Speed reference: Analog Input AI 90-10 V
Back 00:00
Startup Assistant & Parameters 12-13
0.0 rpm
Save
50.0 rpm
Next
0.0 rpm
600.0 rpm
Done