ABB ACS880+N5350 User Manual page 168

Parameter (Number)
Block Title
HW CONTROL BOARD SUPPLY
CONFIGURATION (95.04)
LANGUAGE (96.01)
SYSTEM
PASS CODE (96.02)
3AXD50000011888
Table 12-4 Level 1 Parameter Block Definitions
Selection (Value)
0 (Internal 24V)
1 (External 24V) The drive control unit is powered from an external power supply.
2 (Redundant external 24V) (Type BCU control units only) The drive control unit is powered from
Not selected None
English English
Deutsch German
Italiano Italian
Español Spanish
Portugues Portuguese
Nederlands Dutch
Français French
Dansk Danish
Suomi Finnish
Svenska Swedish
Russki Russian
Polski Polish
Czech Czech
Türkçe Turkish
14 CTDD User
13 Fieldbus
12 Expert Commissioner
Default: 0 (Internal 24V)
Range: 0 - 2
The drive control unit is powered from the drive power unit it is
connected to.
two redundant external power supplies. The loss of one of the supplies
generates a warning (AFEC External power signal missing).
Specifies how the control unit of the drive is powered.
Default: English
Range: -
Selects the language of the parameter interface and other displayed
information when viewed on the control panel.
Notes:
• Not all languages listed below are necessarily supported.
• This parameter does not affect the languages visible in the Drive
composer PC tool. (Those are specified under View – Settings.)
Default: -
Range: 0 to 99999999
Does not default. Setting access level to 13 (Fieldbus) opens all Fieldbus
applicable parameters (groups 50 to 56 and monitoring parameters 3.05,
3.06, 6.01 and 6.11). Expert commissioner enables all parameters in the
drive by setting 96.02 = 12.
Descriptions
Startup Assistant & Parameters 12-89