Configure Supplementary Services; Select Mode - ASCOM IP-DECT Base Station Installation And Operation Manual

Hide thumbs Also See for IP-DECT Base Station:

Table of Contents

Installation and Operation Manual

IP-DECT Base Station & IP-DECT Gateway

Note: When exclusive is enabled for a coder it might be impossible to make calls outside

the IP-DECT system.

Select DECT > System.

Choose the applicable coder in the Coder drop-down list.

Note: The G726-32 coder is not supported by SIP.

Enter the sample time in milliseconds in the Frame text field.

Choose Exclusive enabled or disabled by checking/unchecking the Exclusive check

box.

Choose Silence Compression enabled or disabled by checking/unchecking the SC

check box.

Click "OK".

7.5.13 Configure Supplementary Services

The supplementary services determine how to handle a call if for example busy or not

answered by the user.

Select DECT > Suppl. Serv.

Mark the Enable check box to activate the following supplementary services.

Figure 44.

Note: To disable a specific service, mark the Disable check box in front.

Enter the Message Center Number in the Message Center No. field.

Click "OK".

Reset in order to make the changes take effect, see

Figure 45.

Figure 25. Supplementary services

The IPBS/IPBL can operate in three different modes: master, strandby master and slave.

Select DECT > Master.

2007-06-18/ Ver. E

TD 92372GB

7.12 Reset

on page 60.

Table of Contents

Ip-dect gateway