Subscribe to Our Youtube Channel
Related Manuals for ASCOM EURIT 133
Summary of Contents for ASCOM EURIT 133
- Page 1 The world in your hands Ascom Eurit 133 User’s Guide Cordless ISDN telephone DECT Attention: Please read the instruction manual as well as the safety precautions before using. Keep the instruction manual carefully!
-
Page 3: Safety Notes
Please read all the safety notes before putting the set into operation: • Safety notes page 5 Operating the set To make good use of all the features of your new Ascom Eurit 133 we recommend that you read the following sections: • Basic settings page 10 •... -
Page 4: Explanations
Explanations Handset Receiver Display symbols Display Fox key Return key (menu key) Internal key Keypad (numbers and letters) Connect key Microphone Battery charge contacts Display symbols Connection indicator Handset volume set to "loud". Call register: the entry has been answered. Microphone on the handset is switched off. - Page 5 User concept With the Ascom Eurit 133 you can optimally and comfortably use up to 5 multiple subscriber numbers (MSNs) allocated by your service provider. This means that for a handset you can allocate a subscriber number to up to 5 different subscribers and configure special settings.
-
Page 7: Quick Reference User Guide
Quick reference user guide This guide contains the main operating se- Taking/ending a call quences. For more detailed information b Press the Connect key. please refer to the detailed user guide. Dialling out After pressing the fox key below "P m " you Press b can select from the following functions: then dial the number... - Page 8 Quick reference user guide Switching loudspeaker on base Brokering station on/off You are making a call while keeping a You are in the middle of a call. second call on hold. Press P m . 1 ≥ 2 change to the other call partner. Select V, v "Loudspeaker".
-
Page 9: Table Of Contents
Table of contents Explanations ........A2 Using a directory entry for Quick reference user guide ....1 off-line call preparation ....18 Safety notes ........5 Transferring directory entries to other handsets ......19 Contents of package ......5 Before the transfer ......19 Accessories ........ - Page 10 Table of contents Supplementary services ....28 Allocating a multiple subscriber Checking and clearing the call number (MSN) ......... 38 forwarding status ......28 Multiple subscriber number settings . 38 Unparking ........28 Identification restriction (CLIR) ..38 Park call-id........28 Call-waiting ........
-
Page 11: Safety Notes
• User Guide including Quick Reference chargeable batteries/primary cells can be dangerous and can lead to malfunctions of and/or damage to the set. Ascom can- Note: not accept any liability in such cases. The plug-in main unit is located under the fibre mould in the box. -
Page 12: Setting Up The Telephone And Putting It Into Service
(min. 1 m) between the base station or handset and the other telephone. Listening protection The Ascom Eurit 133 transmits the voice Setting up your telephone data between base station and handset in Your telephone is designed to be used un- encrypted form (scrambled). -
Page 13: Connecting The Base Station
Setting up the telephone and putting it into service Connecting the base station Disconnecting the cords from the base station Warning! Make sure you do not confuse the plugs First unplug the mains unit from the 230V of the connecting cord and plug-in mains mains socket. -
Page 14: Inserting And Charging The Battery Cells In The Handset
Setting up the telephone and putting it into service Inserting and charging the battery cells in the handset Inserting the battery cells 3. Slide the battery compartment cover 1. Remove the battery compartment back until it clicks into place. cover by pressing it slightly and 4. -
Page 15: Charging The Battery Cells
Setting up the telephone and putting it into service Charging the battery cells Note: An audible acknowledgement tone at the The battery cells are not charged when start of the battery charging process sig- supplied. To charge the batteries you need nals that the handset is correctly positioned to place the handset onto the base station. -
Page 16: Basic Settings
Basic settings Please note that the text in this user guide Display may differ somewhat from the text on the In the On state the internal call number of display. the handset as well as the date and time are displayed and the three following func- Controls tions of the menu key are available: Redial-Register, directory and main menu. -
Page 17: Keying In Names
Basic settings Fox key (menu key) Connect key Has several functions. In the bottom dis- • To set up calls to external call partners play line, up to three symbols/texts can be • To take and end incoming calls displayed. If you want a function to be car- •... -
Page 18: Practical Examples
Basic settings Main menu You are now in the menu "Handset set- tings". In the On state "P m" provides the follow- Now scroll to the menu item "Language" ing functions: and press " ". Change user ABCD Language¤¤¤¤¤¤¤ Calling-Register V ... -
Page 19: User Concept
User concept You determine the designation of the user (Private, Daughter etc.) under "Handset With your Ascom Eurit 133 you can set up settings". In the case of incoming calls, the a maximum of five users on one handset, set then immediately signals whom the call e.g. -
Page 20: Handset: On State
Basic settings Handset: ON state Lock state (key lock) In the lock state the keyboard is locked. Keypad lock Incoming calls are signalled and can be answered by pressing the Connect key. To Handset off make an outgoing call you need to switch the handset from the lock state to the On Handset settings state. -
Page 21: External Calls
External calls Answering a call Off-line call preparation The ringing tone sounds on the base sta- You can key in a call number via the keypad tion and the red light flashes. or take over an entry from the Calling-Reg- ister or the Redial-Register and if necessary On the handset the melody specified for correct it. -
Page 22: Redial Register
External calls Redial register Callback to busy subscriber The last 15 names or numbers dialled are stored automatically. If the memory is full, If the dialled subscriber is busy, an auto- the oldest entry will be overwritten. matic callback or automatic redial can be Press W . -
Page 23: Directory
Directory Storing an entry in the directory Setting options for an entry For simple and fast dialling you can create You can allocate the following options to a personal directory containing up to 150 every entry: names and call numbers. Select The entry is always dialled Enter the desired call number... -
Page 24: Selecting An Entry In The Directory
Directory Selecting an entry in the Editing/deleting a directory private file entry Press t . Search for the desired entry as described above and select the entry by pressing "i". Scroll in the directory by pressing "V" or "v" or enter up to three ABCD initial characters of the desired name on the numeric keys. -
Page 25: Transferring Directory Entries To Other Handsets
"Prepare handset 2" appears. When you have logged on two or more Select an entry. handsets to your Ascom Eurit 133 you can Start the transfer by pressing the transfer the entire directory or individual Connect key. entries from one handset to another. This... -
Page 26: Calling-Register
Calling-register Editing the calling-register The calling-register with 30 entries can be searched via two menu items: at least 10 entries are reserved for unanswered calls Select "i" to edit the entry: and at least 5 entries for answered calls. P ABC Edit the entry. The entries are listed, sorted according to user, including the number of calls and the P t... -
Page 27: Provider Dialling
Provider dialling Your Ascom Eurit 133 supports you with Note: several options when selecting the most If several functions are active, the provider economical connection. is selected/dialled as follows: Service functions 1. Option to the directory entry. 2. Destination prefix dialling for certain call numbers (e.g. -
Page 28: Shortcuts
Shortcuts Shortcuts to functions Taking a shortcut You can program up to 9 shortcuts. E.g. The handset is in the On state. with the numeric keys 1– 9, a shortcut is Press the fox-key below "P m". possible for a function selected by you which does not require any editing (entry of numbers or letters) or value settings, e.g. -
Page 29: During The Call, 1 Connection
During the call, 1 connection Internal inquiry Parking With the internal key i you can confer You can park a call for approx. 3 minutes with other internal subscribers or transfer and during this time retrieve it from an- a call (see "Internal calls"). other telephone. -
Page 30: Adjusting The Handset Volume
During the call, 1 connection Adjusting the handset volume Call waiting To be better able to hear your call partner, You are in the middle of a call (internal or you can increase the handset volume external) while an external call to you ar- during a call. -
Page 31: During The Call, 2 Connections
During the call, 2 connections Menu in communication state You are connected with a call partner and have a second call on hold. The following functions are available under "P m" during an external call: Brokering (alternating calls) Alternate between calls by pressing "1 ≥ 2" Park or "2 ≥... -
Page 32: Internal Calls
Internal calls Making calls between two Enquiry call to another handset handsets You are making an outside call on your You can make calls between two handsets. handset and want to make an enquiry call to another handset. Press i Press i Key in the internal call number, e.g. -
Page 33: Global Call/Paging
Internal calls Global call/paging From the handset You can send a global call from your own handset to all the registered sets. Press i Press 9 From the base station i Briefly press on the base station. The internal ringing tone rings on all the registered handsets. -
Page 34: Activating Call Diversion
Unpark Unparking Park call-id. You have parked a call and want to an- swer it (unpark it) on your Eurit 133. Select Activating call diversion the menu item "Unpark", if necessary en- ter the park call-id. and press the fox-key It is a prerequisite for call diversion that at below "... -
Page 35: Call Charges And Call Duration
Call charges and call duration Setting the currency During outgoing calls your Ascom Eurit 133 displays the costs and the call duration. Please note that for technical reasons, the Costs amount stated on your telephone bill may not agree with the values of your display. -
Page 36: Direct Call (Babyphone Feature)
Direct call (babyphone feature) Activating direct call Initiating a direct call Press b When direct call (babyphone feature) is activated, an important number can be The direct call number stored is called by pressing any key except for the dialled automatically. fox-key. -
Page 37: Preparing The Base Station For Registration
Operation with several handsets Registering a handset The Ascom Eurit 133 allows you to operate up to 6 handsets on one base station. You can make two internal calls between two If the base station has been prepared, you handsets and at the same time one can register the handset to the base station. -
Page 38: Logging A Handset Onto A Third-Party Base Station (Gap)
Operation with several handsets Logging a handset onto a Logging a third-party handset third-party base station (GAP) onto the base station To log your handset onto a third-party base Another handset must support the GAP station, the latter must support the GAP generic access profile in order to be logged generic access profile. -
Page 39: Gap Uses
Successful de-registration is signalled on the display. Note: To de-register a handset, you must be in the vicinity of the base station. You can only de-register a third-party base station with the handset Ascom Eurit 133, not with the other handset itself. -
Page 40: Application Example
Application example established with the base station shown on the handset. You can always be contacted You have an Ascom Eurit 133 at home and via the base station shown in the display. use identical equipment at your workplace. You can now also use the handset from... -
Page 41: Handset Settings
Handset settings Setting the language Note: The batteries may be damaged if the For menu guidance you can select your handset is programmed to the wrong preferred language: battery type. Handset settings General Setting Language Handset settings Deutsch English Settings Français Keyclick Italiano... -
Page 42: Range Warning
Handset settings Range warning Lighting If you activate the range warning, a If you do not require the display lighting warning signal will sound if you leave the function you can switch it off. radio range in the course of a call in the communication state. -
Page 43: Handset Volume
Handset settings Handset ringer Handset-PIN (Personal Identification Number) You can set your handset to provide a dif- ferent ringing tone for each user. If you The handset PIN is required if you want to want to change the ringing tone, first select disable individual operating options the respective user (username). -
Page 44: Multiple Subscriber Number (Msn)
Handset settings Multiple subscriber number Identification restriction (CLIR) settings For each user (MSN) you can determine With these settings you specify the basic whether or not you want to transmit your conditions for your system. These settings call number. apply to all handsets in the system. Note: BaseStat. -
Page 45: Time And Date
Handset settings Time and date Base station PIN (Personal Identification Number) When you first operate the telephone or after a power failure, date and time will The base station PIN is required if you want not be correct. After the first outgoing call, to protect individual user options (logging- date and time will automatically be off handset etc.) from unauthorised access. -
Page 46: Pbx-Related Operation
PBX-related operation Autom. ECT When operating the Ascom Eurit 133 on a PBX, the characteristics of the PBX must be taken into account. For further Switching with disconnect. You can test for information consult the operating in- yourself whether you need to activate this structions for your PBX. -
Page 47: Resetting The Handset To The Default Setting
Service functions Software version Service functions Shows the software version of handset and Reset base station. Handset Default setting Directory Base station Default setting Software version Resetting the handset to the default setting This procedure resets all settings on the handset to the default setting. -
Page 48: General Information
General information Troubleshooting Most malfunctions will not be due to a defect on your telephone. You can often save time and money by correcting minor faults yourself. Symptom Cause Remedy No display Handset not switched on Press Connect key Battery cells discharged Charge handset/battery cells, see page 8–10 No radio link to the... -
Page 49: Guarantee
General information Guarantee CE labelling During the period of guarantee Ascom will The product complies with the require- rectify free of charge any defects in material ments of EU guidelines: or workmanship. Ascom reserves the right to repair or replace the handset. -
Page 50: Technical Data
Technical Data ISDN Permissible ambient conditions Connection: Base connection for operation: 5 °C to 40 °C 5% to 85% Protocol: DSS 1 (Euro ISDN) relative humidity Permissible DECT storage temperature: – 25 °C to + 70 °C Standard: DECT/GAP Dimensions Frequency range: 1880 MHz to 1900 MHz Base station Transmission... -
Page 51: Index
Index Accessories ........... 5 Indicator ..........9 Acknowledgement sound ..... 9 Insert cells ..........8 Inserting the battery cells ...... 8 internal ........11, 23 Base station .......... 7 Battery ..........35 Last number redialling, activate ..16 Listening protection ......6 Logging off handset ...... -
Page 52: Tables
Tables... - Page 53 Tables...
-
Page 54: Handset Settings
Menu tree (On state) Level 1 Level 2 Level 3 Level 4 Nutzerwechsel Change user Anrufliste Calling-Register Unanswered Answered Delete register Keypad lock Ringer off Handset settings Handset off Handset volume Direct call Language Deutsch English … Username User A …... - Page 55 Menu tree (On state) Level 1 Level 2 Level 3 Level 4 BaseStat. setting MSN settings Number MSN allocation Ident. restrict Call-waiting Log on On base station On other system Other handset Log off Public access Functions Incoming code Autom. keypad Autom.
- Page 56 Menu tree (On state) Level 1 Level 2 Level 3 Level 4 Provider Number Name Service functions … Directory transf. Directory Single entry Default setting Reset Handset Directory Base station Software version Last call Charges Check charges Total handset System MSN A …...
-
Page 57: Labels For Important Numbers
Labels for important numbers... -
Page 59: Guarantee Voucher
Guarantee voucher a Guarantee Voucher Garantieschein, Bon de garantie, Certificato di garanzia, Garantiebewijs, Takuutodistus, Garantibevis, Garantisedel, Garantibevis, Certificado de Garantía, Talão de garantia device type: (Geräte-Typ, type d’appareil, tipo di apparecchio, toesteltype, laitetyyppi, maskintype, apparattyp, apparat-type, modelo del aparato, modelo do aparelho): serial number: (Seriennummer, numéro de série, numero di serie, serienummer, sarjanumero, serienummer, serienummer, serienummer, número de serie, número de série):... -
Page 61: Declaration Of Conformity
Declaration of Conformity... - Page 62 Declaration of Conformity...
- Page 64 Ascom Deutschland GmbH Fachbereich Endgeräte Victor-Slotosch-Str. 11 D-60388 Frankfurt Tel. 06109 / 738-0 Austria: Ascom Austria Ges.mbH Hohenbergstr. 20-22 A-1120 Wien Tel. 0043 1 811 770 ©Ascom Business Systems AG 2001 Subject to availability and product development ABSC 20313553 20313553en_ba_000_a0 A.089...
Need help?
Do you have a question about the EURIT 133 and is the answer not in the manual?
Questions and answers