Configure Automatic Firmware Update; Add Licence; Download Licence; Delete Licence - ASCOM IP-DECT Base Station Installation And Operation Manual

Installation and Operation Manual
IP-DECT Base Station & IP-DECT Gateway

Add Licence

A licence is needed to make the IP-DECT system operate. The licence is added in the
master.
1 Select General > Licence.
2 Click "Browse" and select the licence delivered by your supplier.
3 Click "Upload"
4 Reset in order to make the changes take effect, see

Download Licence

The licence file can be downloaded from the IPBS/IPBL and saved on a disc or a server.
1 Select General > Licence.
2 Click the "download" link to the right of the licence or click "download all" if all
licences shall be downloaded.
3 Click "Save" and select where to save the licence file.

Delete Licence

Note: A licence file is needed for the IPBS/IPBL to operate properly. Be sure to have a
backup of the licence before deleting it.
1 Select General > Licence.
2 Click the "delete" link to the right of the licence or click "delete all" if all licences
shall be deleted.
7.1.4

Configure Automatic Firmware Update

The IPBS/IPBL can be configured to automatically update its firmware. A script file must be
uploaded to a suitable directory on an internal web server. For information on the script
file syntax, see
1 Select General > Update
2 Enter the URL of the script file in the URL text field.
3 Enter the poll interval, in minutes, in the Interval (min) text field
4 Click "OK".
2007-06-18/ Ver. E
Appendix A: How to Use the Update Server
TD 92372GB
7.12 Reset on page 60.
on page 64.
33