Dashboard Instruments and Controls
Table Valid for Canadian Market Only
Ignition
Engine
Device
Status
Position
OFF
ACC
Off
4
RUN
Off
RUN
On
RUN
On
(1) The lighting system uses the same LED for DRL and front position lights with two different levels of intensity: high
for DRL and low for position lights.
(2) The lights are powered up for 30 minutes to preserve the charge of the battery.
(3) To preserve the charge of the battery, do not leave these lights on for a long time.
138
Twilight
Sensor
Mode
Position lights (1), side
–
–
marker and license plate
lights on (3).
Position lights (1), side
–
marker and license plate
lights on (2).
Position lights (1), side
–
marker and license plate
lights on (2).
DAY
DRL (1) on.
Low beams, position (1),
NIGHT
side marker and license
plate lights on.
Light Switch Position
AUTO
All lights off.
All lights off.
All lights off.
DRL (1) on.
Low beams, position (1),
side marker and license
plate lights on.
Low beams, position (1),
side marker and license
plate lights on.
Low beams, position (1),
side marker and license
plate lights on (2).
Low beams, position (1),
side marker and license
plate lights on (2).
Low beams, position (1),
side marker and license
plate lights on.
Low beams, position (1),
side marker and license
plate lights on.