Table of Contents
Advertisement
Understanding the Vehicle
section) corresponds to a mirror tilt
position in reverse.
NOTE:
The mirrors tilt in reverse can be
turned on and off using the MIA
2
system, refer to "Functions of Settings
Menu on MIA" in section "Dashboard
Instruments and Controls".
Folding Mirrors
By selecting this function on MIA the
rear-view mirrors automatically fold
when the vehicle is locked by the key
fob and when the power liftgate
is closed and locked by pressing the
button on the outer ledge of the
left trunk compartment lining. When
the vehicle and the liftgate will be
unlocked and the ignition device is set
in RUN position, the rear-view mirrors
will automatically open in the position
they had before the lock.
The switch for the power folding
mirrors is located between the power
mirror switches.
26
Press the switch once and the mirrors
will fold in; press the switch a second
time to reset the mirrors to the
standard position.
There is a way to make external
mirrors automatically fold/unfold.
• If the function is available, it needs
to be activated by MIA (refer to
"Functions of Settings Menu on MIA"
in section "Dashboard Instruments
and Controls").
• If the mirrors are automatically
folded after the last lock action, then
they will automatically unfold when
the ignition device is set on ACC or
RUN position.
• If the mirrors were manually folded
by the switch on the driver's door
panel, before a lock action, they will
need to be manually unfolded to
reactivate the automatic function.
CAUTION!
Never retract or open the mirrors
manually: it could damage the power
mechanism.
Internal Rearview Mirror
The position of internal rearview
mirror can be manually adjusted,
and is endowed with an
accidentprevention release system
operating in the event of a collision.
Internal rearview mirror is
electrochromic: this glare function is
automatically deactivated in reverse to
ensure maximum visibility of obstacles.
Advertisement
Table of Contents
