Table of Contents
Advertisement
Understanding the Vehicle
When instead there is the needing
to switch off the whole high beam
module to obtain the no glaring
effect, on the instrument cluster there
will be just one indicator on: the green
2
one.
When the scenario allows the partial
or full use of high beam with no
glaring disturbance, the blue indicator
will appear again.
NOTE:
• Some unpredictable conditions,
such as dirt, dust, film or any
other obstruction on camera lens
zone events could affect "Glare
Free" function making it working
improperly.
• Heavy rainy and foggy weather could
affect system performance, leaving
the full beam switched on for longer
time than the nominal working
34
condition. This could cause a glaring
disturbance for other vehicles, to
avoid this the driver has to switch off
the high beam manually.
• In phase of disengagement of the
function, the minimum operating
speed is 15.5 MPH (25 km/h).
• "Glare Free" function proper
operation is guaranteed if vehicle
speed is less than, or at least equal to
155 MPH (250 km/h).
Automatic High Beams/Glare Free
High Beams Failure
In the event of a failure on high beam
system (Automatic or Glare Free
equipped, as well), the related amber
warning light will light up on the TFT
display.
Take your vehicle to the nearest
Center of the Authorized Maserati
Dealer as soon as possible avoiding to
use this system.
Interior Lighting
The interior and external approach
lights turn on and off when
entering/exiting the vehicle (see
"Illuminated Entry/Exit" in section
"Before Starting" for further
information).
Dome Lights
The dome lights integrated into the
front dome console, include a central
and two reading lights.
The central light automatically turns
on when one of the doors is opened
and turns off when the door is closed
(timed switching off). The light may be
switched on manually by pressing the
central button.
The reading lights are controlled by
the respective side buttons.
If they are turned on by pressing the
button, both central and reading lights
will stay on for about 10 minutes after
turning the engine off, and will then
turn off gradually.
When the exterior lights are switched
on, the two night LEDs fitted on the
side of the power buttons on the
overhead console will light up to
facilitate the use of the transmission
lever and the central console.
Advertisement
Table of Contents
