Starting and Driving
• Slide cover downward to disengage
the two projecting elements
indicated in the figure from bumper.
5
• Store cover in the luggage
compartment.
Install the Trailer Tongue
• Pull out the trailer tongue which is
housed in a bag positioned on the
right side of the trunk.
• Push the trailer tongue in the seat
on the cross member of the car up
218
to match the hole A on the trailer
tongue with the one on the cross
member support.
• Insert the pin 1 into the hole A and
push it until it stops.
• Install the split pin 2 at the opposite
end of the pin 1.
Connect the Electrical System
of the Trailer
• For connection, remove the
protective cover from the car
connector which is found on the
left-hand side of trailer tongue seat.
• Engage the trailer male connector
into the car female connector.
• Push trailer connector fully home and
engage the safety lock, if any.