Table of Contents
Advertisement
Driver Assistance Systems
NOTE:
In case of wet road or raining
conditions the function could be
disabled by the system in order to
minimize the risks.
Speed Range of Use
Speed
Minimum
Engaged/activated
Maximum
Customized Settings
LKA is configurable by the driver
in order to maximize its efficiency
based on the driver driving style
and the expectation of the system,
reducing at the same time the possible
invasiveness.
6
Entering "Settings" menu of the
"Vehicle" page on MIA display the
driver can see the current setting
beside the "Lane Keeping Assist"
soft-key.
Touching "Lane Keeping Assist" soft-
key to enter the setting page.
Driver warnings can be only "Visual"
or "Visual & Haptic" (default mode).
System response can be set to "Early",
"Medium" (default mode) or "Late".
252
System reaction force can be set to
"Low", "Medium" (default mode) or
"High".
Meanings of Settings
• "Visual" only: the system will not
request any steering torque/vibration
to correct the car trajectory. The
MPH (km/h)
system will only show on the TFT
37 (60)
display with yellow/yellow flashing
indication respectively when the
37 (60)
driver is approaching or already
112 (180)
touching the line lane with at least
one tire.
• "Visual & Haptic": the system will
apply steering torque when lane
departure is detected while showing
at the same time the proper cluster
indication, adding to this steering
vibration when the departure is very
imminent.
When "Visual & Haptic" is selected
and LKA is enabled then the following
menu will be used by the system.
• "LKA Sensitivity": it tunes the
distance to the lane boundary where
the system will start to apply steering
torque.
• "LKA Strength": it tunes the steering
torque and speed value increasing
or decreasing it to have a stronger
or weaker trajectory correction/
deviation.
WARNING!
In rare cases, Lane Keeping Assist
(LKA) may make an inappropriate
steering torque application. LKA may
be interrupted at any time counter
steering. Lack of attention may lead to
serious injury or death.
System Availability
The ADAS systems help the driver
while driving. These systems can be set
and monitored simultaneously on
the display, after opening "Driver
Assist" menu (see paragraph "TFT
Display: Menu and Submenu Content"
in section "Dashboard Instruments and
Controls").
When you are not in the "Driver
Assist" page, the system status is
indicated by a telltale at the top left of
the TFT display.
LKA is designed for an attentive driver;
therefore the system is available only
when his/her hands are on the steering
wheel or with hands off only for a very
limited amount of time. When the
system is enabled it will trigger cluster
warning in case at least one hand is
not detected on the steering wheel.
The torque application as well as the
vibration are suppressed/inhibited
in case of: high driver torque in
Advertisement
Table of Contents
