Table of Contents
Advertisement
Starting and Driving
NOTE:
The message "Remote Start Active
Push Start Button" will display in the
instrument cluster until you push the
START/STOP button.
Driver's Seat Comfort with
Remote Start
The driver's heated and ventilated
seat and the heated steering wheel
(if equipped) can be programmed
to come on during a remote start.
Refer to "With Vehicle Start" function
of the "Seats & Comfort" submenu
in the "Settings" page (see chapter
"Functions of Settings Menu on MIA"
5
of section "Dashboard Instruments and
Controls" for further information).
Radio Frequency RKE
Transmitter - Regulatory
Information
The "Regulatory Information" for
all the radio frequency and radar
devices can be consulted by accessing
the "Services" section on the website
www.maserati.com.
168
Automatic Start&Stop
System
The Maserati Start&Stop system
allows the engine to automatically
switch off when the vehicle stops and
to restart when the driver intends
to drive. This function helps reduce
fuel consumption. During the "Stop
(AutoStop)" phase the ignition is
still on and all security functions are
available.
In order for the Start&Stop to activate,
the vehicle must be stationary and the
brake pedal adequately pressed.
NOTE:
If the brake pedal is not sufficiently
pressed the Start&Stop may not
function even if the vehicle is stopped.
When the Start&Stop switches off
the engine, the related light
illuminates on the instrument cluster.
As soon as the brake pedal is released,
the engine turns on.
While the vehicle is stopped, the
transmission can be placed in P (Park)
pressing the "P" button on the shift
lever.
In this case it is possible to release
the brake pedal and the vehicle will
remain in "AutoStop" with engine
off. Pressing the brake pedal and
shifting transmission into D (Drive)
or R (Reverse) will deactivate the
"AutoStop" condition and restart the
engine.
Start&Stop Deactivated
Start&Stop function is deactivated
under the following conditions:
• When SPORT or CORSA drive mode is
activated.
• When
(ESC OFF) drive mode is
activated.
• When ride height is set to "Off Road
1" or "Off Road 2".
• If it has been disabled through the
main menu item "Start & Stop"
via the controls on the right side
of the steering wheel (see chapter
"TFT Display: Menu and Submenu
Content" in section "Dashboard
Instruments and Controls") or via
the MIA by pressing the "S&S Off"
soft-key on the main bar or through
Advertisement
Table of Contents
