Table of Contents
Advertisement
Unstored Messages with
Ignition Device in RUN
This message type is displayed until the
ignition device is in RUN position. An
example of this message type is the
one shown in picture.
Five-Second Unstored
Messages
When appropriate conditions occur,
this type of message appears on the
main display area for five seconds then
returns to the previous screen.
Navigation Messages
• When the navigation menu is
enabled on the MIA, information
pop-ups will be displayed while
changing direction or approaching a
turning point until the navigation
system requires its displaying, or until
a command is given via the buttons
on the steering wheel.
On highway, the first pop up will be
displayed at 2 miles (3.2 km) from the
turn, on roadway, at 1 mile (1.6 km).
While approaching the turn, further
pop ups will be displayed starting at
437 yd (400 m) from the turning
point and the countdown to 0
miles/meters.
While getting closer to a turn, the
sections referred to the distance
already traveled will switch off while
the ones referred to the distance yet
to be traveled will remain on.
NOTE:
• Popup boxes might take up the space
normally used to display main menu
items and relevant submenus.
• The distance indicated under the
road name is expressed in the unit of
measure set by the user.
Dashboard Instruments and Controls
TFT Display Setting and
Menu Overview
Setting Controls
Operate the controls on the right side
of the steering wheel to scroll, modify
and program the main and submenu.
Press and release the multifunction
switch in the
and
directions, corresponding to the same
symbols on the TFT display, to scroll
upwards and downwards the main
menu titles.
The screen area in sector 1 (main Area)
will be updated and the selected title
will be shown in sector 3 (main menu
number and title).
Press and release the multifunction
switch
, corresponding to the
same symbol and the indication
"SELECT" on the TFT display, to
enter the information screens or
4
arrow
95
Advertisement
Table of Contents
