Table of Contents
Advertisement
adjustable vents at the rear end of the
central console for the rear passengers
only.
The climate control panel features
a single button for each zone: press
it several times to select and set the
required airflow distribution mode.
The airflow mode combinations will
cycle in this order: "Dashboard" → "Bi-
Level" → "Floor" → "Mix" → "Defrost"
→ "Hi-Level" → "Tri-Level". When MIA
are out of the "Comfort" page, each
time the button is pressed, a pop up
will appear with the airflow mode
activated.
When in the "Comfort" category, the
MIA displays the relevant soft-keys to
set these modes individually for each
zone.
The arrow on the
symbol soft-key
in white indicates active status, in grey
indicates inactive status.
Available settings are as follows:
• "Dashboard" mode
Air for each zone flows from four
adjustable vents of the dashboard
and two positioned at the rear end
of the central console. Each of these
vents can be singly adjusted. The air
grids or vanes of the vents can be
moved to adjust air flow direction.
A setting wheel, placed near each
vent, allows to regulate or close the
airflow.
• "Bi-Level" mode
Air for each zone flows from the
dashboard and central console
adjustable vents and from the fixed
floor vents described in "Floor"
mode. A small portion of the
airflow is directed through the
defrost/demist vents to prevent
windows fogging.
NOTE:
Bi-Level mode is designed to let cooler
air come in the dashboard and rear
part of the central console vents and
warmer air from the floor vents.
• "Floor" mode
Air for each zone flows from the
fixed front vents, located under the
dashboard, and under the front seats
for the rear passengers. A small
portion of the airflow is directed
through the defrost/demist vents to
prevent windows fogging.
• "Mix" mode
Air for each zone flows from the
defrost/demist vent, the fixed vent
under the dashboard and which from
floor vent described in "Floor" mode.
Dashboard Instruments and Controls
This mode is recommended for cold
climates, to improve comfort and
prevent windows fogging.
• "Defrost" mode
Air for each zone flows from the
dashboard defrost/demist vents to
prevent windows fogging.
• "Hi-Level" mode
Air for each zone flows from the
dashboard defrost/demist vents, from
the dashboard and central console
adjustable vents and from the fixed
floor vents described in "Floor"
mode.
• "Tri-Level" mode
Air for each zone flows from all the
adjustable/fixed and defrost/demist
vents.
14. "SYNC" mode
Touch the "SYNC" soft-key on the MIA
to switch the Sync function on/off.
The "SYNC" soft-key illuminates when
this function is selected. This function
is used to synchronise the passenger
temperature setting with the driver
temperature setting.
It is possible to activate this function
even when MIA is in any category
other then "Comfort" through the
pop up window that opens when
you touch the driver's temperature
soft-key on the upper status bar.
4
155
Advertisement
Table of Contents
