Passenger Temperature Control; Recirculation; Blower Control - Maserati Levante Owner's Manual

Provides the driver with independent
temperature control. Touch the blue
soft-key for cooler temperature.
Touch the red soft-key for warmer
temperature. The driver's temperature
setting will be displayed on the upper
status bar, left side.
The temperature can also be adjusted
by touching and sliding the bar
towards soft-key , to increase
temperature, or towards soft-key
to decrease it.
During this phase, the corresponding
temperature will be displayed on the
upper status bar.
It is possible to adjust the temperature
on the driver and passenger side
even when you are outside the
"Comfort" screen by simply touching
the temperature indication on the
upper status bar. A pop up will appear
below with the bar and
to change the temperature and the
"SYNC" soft-key to synchronise the
driver's side temperature with which
of the passenger side (see example in
picture).
You can also increase or decrease the
temperature using the rocker switch
on the climate control panel.
NOTE:
In "SYNC" mode, this control will also
automatically and simultaneously
adjust the passenger temperature.

4. Passenger temperature control

Provides the passenger with
independent temperature control.
Touch the
/ arrows
temperature. Touch the
for warmer temperature. The
passenger's temperature setting will
be displayed on the upper status bar.
The temperature can also be adjusted
by touching and sliding the bar
towards soft-key
temperature, or towards soft-key
to decrease it.
Dashboard Instruments and Controls
soft-key for cooler
soft-key
, to increase
During this phase, the corresponding
temperature will be displayed on the
upper status bar as for the driver's
side.
You can increase or decrease the
temperature using the rocker switch
on the climate control panel.
NOTE:
Pressing the 4 button/soft-key while in
"SYNC" mode will automatically exit
"SYNC" and it is possible to adjust the
temperature on the passenger side.

5. Recirculation

Press to change the current setting,
the LED indicator on the button and
the relevant soft-key illuminates to
indicate which recirculation function
is activated. For further details, see
paragraph "Dual zone Climate Control
Functions" in this chapter.

6. Blower control

Blower control is used to adjust the
amount of air forced through the
climate system. Eight levels of blower
speed can be selected. Adjusting the
blower will cause automatic mode to
switch to manual.
On the climate control panel, push the
rocker switch up to increase fan speed.
Push the rocker switch down to
decrease fan speed. Pushing down the
rocker switch when set blower is at
4
153