Table of Contents
Advertisement
Before Starting
Power Sunshades on Rear
Door Windows ( )
NOTE:
• On vehicles provided with power
sunshades on the rear windows, the
window switches also operate the
sunshades.
• The rear windows lock button
3
operates the rear power sunshades as
well.
• The window and sunshades controls
will operate only if the ignition
device is in ACC or RUN position.
Operation of the rear windows
and related sunshades is done by
pressing or pulling the window switch
and depends on the position of the
windows prior to the command
operation.
As described for the opening and
closing functions of the power
windows (see chapter "Power
Windows" in this section), the
windows switch has two functioning
modes: press and release the switch to
the first detent to partially move the
window; press and release the switch
to the second detent to move the
window all the way up or down.
78
Operations
WARNING!
Rear seat passengers must be careful
when operating the sunshades, since
there is the risk of being pinched
between the top of the sunshade
and the head lining, during raising,
and between the top edge of the
sunshade and the door panel, during
lowering.
CAUTION!
Before activating the sunshade, make
sure that no objects can interfere with
its travel.
The following images and the
subsequent text show the possible
starting positions ("A", "B", "C" and
"UP", "DOWN") and function of the
window and the sunshade, to be
independently activated by pressing or
lifting the control switch
(1) or second (2) detent.
to the first
Advertisement
Table of Contents
