Table of Contents
Advertisement
Dashboard Instruments and Controls
Customizing the Main Status
and Category Bar
The soft-keys for the main functions
of the MIA system, indicated at the
bottom of the MIA display, and some
of those on the main status bar can
be easily customized to suit user's
requirements, as follows:
• drag and drop the soft-key to move it
inside the bar;
• touch the "Apps" soft-key to open
applications/settings screen or access
4
the screen with the function symbol
to be inserted in the bar;
• drag and drop the icon
corresponding to the selected
function until it overlaps the one to
be replaced on the top of the bottom
bar.
Once it is set in the category bar, the
new connection will be immediately
operational.
120
Functions of Controls
Menu on MIA
The MIA system uses a combination
of keys able to access and change the
customer programmable functions
present in the "Controls" or "Settings"
menu of the "Vehicle" screen page.
A shortcut to set the customer
programmable functions is available in
the "Apps" screen page.
Once you enter the "Controls" screen,
using the touch soft-keys or turn
the "TUNE-SCROLL" knob to scroll
and change settings of the customer
programmable functions.
Touch the function soft-key or press
the "BROWSE-ENTER" button to
confirm the selection.
Some functions can be set only on or
off touching the corresponding soft-
key which will be highlighted with the
yellow outline (example: "Start&Stop
Off").
Other functions can have one or
more instruction/setting pages
that are accessed by touching the
corresponding soft-key (example:
"Glove Box").
NOTE:
• All settings must be edited with
ignition device set to RUN position.
• Some of the customer programmable
functions are optional or for a
specific model/version and may not
be available on your vehicle.
• Only one touch screen area/soft-key
may be selected at a time.
• Screen Off
This function allows you to switch
off the MIA screen backlight if it
becomes annoying when driving.
• Surround View Camera
Activating this function the system
uses four cameras to monitor the
area around the vehicle when
transmission lever is shifted to P
(Park), N (Neutral) or D (Drive)
position.
When activation occurs by touching
the "Surround View Camera"
soft-key in the "Controls" screen or
moving the shift lever in R (Reverse)
position, the initial view will be the
Advertisement
Table of Contents
