Table of Contents
Advertisement
The HBI number is a unique code that identifies the board. The root directories in the EEPROM and the
microSD card contain subdirectories in the form HBIBoardNumberBoardrevision, for example HBI0309.
There are two stages in programming and configuring the images in the FPGA:
1. The MCC reads the configuration files in the microSD card to determine which image to load.
The debug USB port supports MSD class enabling Drag
configuration microSD card. The microSD card appears in the file system as a device with removable
storage.
2. The MCC loads the FPGA image into the FPGA.
Configuration port connected to an external workstation
If you connect an external workstation to the MCC debug port, you can access the configuration
microSD card. You can then edit and copy configuration and software images to the SD card.
Related information
3.5.1 Overview of configuration files and microSD card directory structure on page 3-63
3.5.2 config.txt generic board configuration file on page 3-64
3.5.3 Contents of the MB directory on page 3-64
3.5.4 Contents of the SOFTWARE directory on page 3-66
100765_0000_04_en
Note
Note
Copyright © 2017–2020 Arm Limited or its affiliates. All rights
Non-Confidential
‑ and ‑ Drop for transferring new images to the
reserved.
3 Configuration
3.1 Overview of the configuration system
3-56
Advertisement
Table of Contents
