Table of Contents
Advertisement
The pack contains the following key folders:
•
:
pcb
— Contains the schematics and PCB top/bottom gerber plots for the board.
•
logical
— Contains the RTL source and the constraints file.
•
. Contains the following files:
docs
— V2M_MPS3_fmc_pinout.xlsx. This spreadsheet shows the MPS3 FMC pinout and net names.
— V2M_MPS3_fpga_pinout.xlsx. This spreadsheet shows the MPS3 FPGA pinout and net names.
—
revision history.txt
— Application Note AN533 Blinky example FPGA image for the MPS3 Prototyping Board PDF
document.
•
boardfiles
— Contains the FPGA image (
the MPS3 microSD card to run the AN533 blinky design on the MPS3 board.
Example FMC board layout
The following figure shows an MPS3 board with an FMC board that is fitted to the FMC‑HPC expansion
connector.
100765_0000_04_en
:
:
.bit
Copyright © 2017–2020 Arm Limited or its affiliates. All rights
Non-Confidential
) file and the MCC firmware (
reserved.
2 Hardware description
2.17 FMC-HPC interface
) file that must be loaded onto
.ebf
2-47
Advertisement
Table of Contents
