Table of Contents
Advertisement
One user‑link selects 3V3 or 5V I/O operations for the Shield 0, Pmod 0, and Pmod 1 interfaces.
One user‑link selects 3V3 or 5V I/O operations for the Shield 1, Pmod 2, and Pmod 3 interfaces.
One user‑link selects 5V or 12V power for the Shield 0 interface.
One user‑link selects 5V or 12V power for the Shield 1 interface.
The maximum currents available at the power and reference pins are:
3V3/IOREF
5V/IOREF
12V
See
1.3 Location of components on the MPS3 board on page 1-15
Related information
A.2 Arduino Shield connectors on page Appx-A-76
A.3 Peripheral Module (Pmod) connectors on page Appx-A-80
1.3 Location of components on the MPS3 board on page 1-15
100765_0000_04_en
Figure 2-21 Shield and Pmod power and I/O reference voltage user-links
Caution
1A maximum available for both Shields and all four Pmod interfaces.
1A maximum available for both Shields and all four Pmod interfaces.
0.5A maximum available for both Shields.
Copyright © 2017–2020 Arm Limited or its affiliates. All rights
Shield 0,
Pmod 0 and
Shield 1,
Pmod 1 I/O ref
Pmod 2 and
Pmod 3 I/O ref
1
J29
J36
Shield 1,
Pmod 2 and
Pmod 3 power
reserved.
Non-Confidential
2 Hardware description
2.16 Arduino Shield and Pmod interfaces
3V3
5V
LCD display and
touch screen
12V 5V
Shield 0,
Pmod 0 and
Pmod 1 power
for the location of the user‑links.
2-45
Advertisement
Table of Contents
