Chapter 2
Hardware description
This chapter describes the MPS3 board hardware.
It contains the following sections:
•
2.1 Overview of the board hardware on page
•
2.2 Example Cortex
•
2.3 Clocks on page
•
2.4 Reset, powerup, and configuration on page
•
2.5 Power on page
•
2.6 Serial Configuration Controller interface on page
•
2.7 MCC-SMC interface on page
•
2.8 USB 2.0 and Ethernet static memory interface on page
•
2.9 Video HDLCD interface on page
•
2.10 Audio codec interface on page
•
2.11 QVGA video CLCD display on page
•
2.12 On-board user components on page
•
2.13 Interrupts on page
•
2.14 FPGA DDR4 memory interface on page
•
2.15 User non-volatile memory on page
•
2.16 Arduino Shield and Pmod interfaces on page
•
2.17 FMC-HPC interface on page
•
2.18 System debug on page
•
2.19 Design settings for correct board operation with a minimal design on page
100765_0000_04_en
‑ M33 IoT Kit subsystem design on page
®
2-23.
2-27.
2-30.
2-36.
2-37.
2-40.
2-46.
2-50.
Copyright © 2017–2020 Arm Limited or its affiliates. All rights
reserved.
Non-Confidential
2-17.
2-21.
2-25.
2-28.
2-35.
2-38.
2-39.
2-41.
2-42.
2-43.
2-53.
2-16