Table of Contents
Advertisement
11-1 Preferred View [100]
This chapter describes the menus and parameters in the software. You will
find a short description of each function and information about default values,
ranges, etc. There are also tables containing communication information. You
will find the Modbus, DeviceNet, EtherCAT and Fieldbus address for each
parameter as well as the enumeration for the data.
Note Functions marked with the sign
Description of table layout
Default:
Selection or
range
Resolution of settings
The resolution for all range settings described in this chapter is 3 significant
digits. Exceptions are speed values which are presented with 4 significant dig-
its. Table 23 shows the resolutions for 3 significant digits.
Table 23
3 Digit
0.01-9.99
10.0-99.9
100-999
1000-9990
10000-99900
This menu is displayed at every power-up. During operation, the menu [100]
will automatically be displayed when the keyboard is not operated for 5 min-
utes. The automatic return function will be switched off when the Toggle and
Stop key is pressed simultaneously. As default it displays the reference and
torque values.
100
Stp
A
Menu [100], Preferred View displays the settings made in menu [110], 1st line,
and [120], 2nd line. See Fig. 62.
100
(1st Line)
Stp
(2nd Line)
A
Fig. 62
Display functions
Functional Description
cannot be changed during Run Mode.
Integer value of
Description
selection
0.01
0.1
1
10
100
0rpm
0.0Nm
SECTION 11
Menu no.
Menu
name
Resolution
83
Advertisement
Table of Contents
