Omron SX-F Instruction Manual page 54

Connecting the Control Signals
46
Fig. 38 Connecting the control signals SX-D4011 to SX-D4022
L3 PE
L1 L2
Control signals
Fig. 39 .Connecting the control signals SX-D4030 to SX-D4037
Fig. 40 Connecting the control signals SX-D4045 to SX-D4090
Note The screening of control signal cables is necessary to comply with the
immunity levels given in the EMC Directive (it reduces the noise level).
Note Control cables must be separated from motor and mains cables.
Terminal 78&79 for
connection of Motor
PTC option
Terminal A- & B- for
connection of stand
by supply option
board
U V
R
DC- DC+
Control signals
Section 5-5