Table of Contents
Advertisement
Process and Application Parameters [300]
[711] Process Value
[389]
[310] Process Ref
[389]
[387]
[712] Speed
Normal PID
160
[388]
Stop steady
Start steady
state test
state test
Steady state
test
[341] Min Speed
Fig. 84
Steady state test
Pump/Fan Control [390]
The Pump Control functions are in menu [390]. The function is used to control
a number of drives (pumps, fans, etc.) of which one is always driven by the
VSD.
Pump enable [391]
This function will enable the pump control to set all relevant pump control
functions.
Default:
Off
0
On
1
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
Number of Drives [392]
Sets the total number of drives which are used, including the Master VSD.
The setting here depends on the parameter Select Drive [393]. After the num-
ber of drives is chosen it is important to set the relays for the pump control. If
Normal PID
Stop/Sleep
[386] PID<Min Spd
391 Pump enable
Stp
Off
A
Off
Pump control is switched off.
Pump control is on:
- Pump control parameters [392] to [39G] appear and are
activated according to default settings.
- View functions [39H] to [39M] are added in the menu
structure.
43161
169/65
4c59
UInt
UInt
Section 11-3
time
Advertisement
Table of Contents
