Omron SX-F Instruction Manual page 203

I/Os and Virtual Connections [500]
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
AnIn change
Original input signal
100%
63%
T
Fig. 99
AnIn1 Enable [513A]
Parameter for enable/disable analogue input selection via digital inputs (DigIn
set to function AnIn Select).
Default:
On 0
!DigIn 1
DigIn 2
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
AnIn2 Function [514]
Parameter for setting the function of Analogue Input 2.
Same function as AnIn1 Func [511].
Default:
Selection:
43209
169/113
4c89
Long, 1=0.001 s
EInt
Filtered AnIn signal
5 X T
513A AnIn1 Enabl
Stp
A
On
AnIn1 is always active
AnIn1 is only active if the digital input is low.
AnIn1 is only active if the digital input is high.
AnIn1 43210
AnIn1 169/114
4c8a
UInt
UInt
514 AnIn2 Fc
Stp Off
A
Off
Same as in menu [511]
Section 11-5
On
195