Table of Contents
Advertisement
Main Setup [200]
11-2-8 Serial Communication [260]
118
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
Brake Fault [25V]
Select the preferred way to react to an alarm trip, activate auto reset and
specify delay time.
Default
Off
1 - 3600s
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
This function is to define the communication parameters for serial communi-
cation. There are two types of options available for serial communication,
RS232/485 (Modbus/RTU) and fieldbus modules (Profibus, DeviceNet and
Ethernet). For more information see chapter Serial communication and
respective option manual.
Comm Type [261]
Select RS232/485 [262] or Fieldbus [263].
Default:
RS232/485
Fieldbus
Note Toggling the setting in this menu will perform a soft reset (re-boot) of the
Fieldbus module.
43100
169/4
4c1c
UInt
UInt
25V
Brk Fault
Stp
A
Off
0
Autoreset not activated.
1 -
3600
Brake fault auto reset delay time.
s
43070
169/229
4bfe
Long, 1=1s
EInt
261 Com Type
Stp
RS232/485
A
RS232/485
0
RS232/485 selected
1
Fieldbus selected (Profibus, DeviceNet or Modbus/TCP)
Section 11-2
Off
Advertisement
Table of Contents
