Table of Contents
Advertisement
I/Os and Virtual Connections [500]
*) Fmin is dependent on the set value in menu Minimum Speed [341].
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
Example
Set the AnOut function for Motorfrequency to 0Hz, set AnOut functionMin
[5334] to "User-defined" and AnOut1 VaMin[5335] = 0.0. This results in an
analogue output signal from 0/4 mA to 20mA: 0 Hz to Fmot.
This principle is valid for all Min to Max settings.
AnOut1 Function Value Min [5335]
With AnOut1 Function VaMin you define a user-defined value for the signal.
Only visible when user-defined is selected in menu [5334].
Default:
Range:
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
AnOut1 Function Max [5336]
With AnOut1 Function Min the physical minimum value is scaled to selected
presentation. The default scaling is dependent on the selected function of
AnOut1 [531]. See Table 28.
Default:
Min
0
Max
1
User defined
2
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
43256
169/160
4cb8
Long,
1=0.1 W, 0.1 Hz, 0.1 A, 0.1 V or 0.001
EInt
5335 AnOut1VaMin
Stp
0.000
A
0.000
-10000.000–10000.000
43545
170/194
4dd9
Long,
Speed 1=1 rpm
Torque 1=1%
Process val 1=0.001
EInt
5336 AnOut1FCMax
Stp
Max
A
Max
Min value
Max value
Define user value in menu [5337]
43257
169/161
4cb9
Section 11-5
205
Advertisement
Table of Contents
