Omron SX-F Instruction Manual page 216

I/Os and Virtual Connections [500]
208
The VSD is ready for operation and to accept a start com-
Ready 13
mand. This means that the VSD is powered up and healthy.
T= T 14 The torque is limited by the torque limit function.
lim
The output current is higher than the motor nominal current
I>I 15 [224], reduced according to Motor ventilation [228], see Fig.
nom
64.
Brake 16 The output is used to control a mechanical brake.
One of the AnIn input signals is lower than 75% of the
Sgnl<Offset 17
threshold level.
Alarm 18 The max or min alarm level has been reached.
Pre-Alarm 19 The max or min pre alarm level has been reached.
Max Alarm 20 The max alarm level has been reached.
Max PreAlarm 21 The max pre alarm level has been reached.
Min Alarm 22 The min alarm level has been reached.
Min PreAlarm 23 The min pre alarm Level has been reached.
LY 24 Logic output Y.
!LY 25 Logic output Y inverted.
LZ 26 Logic output Z.
!LZ 27 Logic output Z inverted.
CA 1 28 Analogue comparator 1 output.
!A1 29 Analogue comp 1 inverted output.
CA 2 30 Analogue comparator 2 output.
!A2 31 Analogue comp 2 inverted output.
CD 1 32 Digital comparator 1 output.
!D1 33 Digital comp 1 inverted output.
CD 2 34 Digital comparator 2 output.
!D2 35 Digital comp 2 inverted output.
Run command is active or VSD running. The signal can be
Operation 36 used to control the mains contactor if the VSD is equipped
with Standby supply option.
T1Q 37 Timer1 output
!T1Q 38 Timer1 inverted output
T2Q 39 Timer2 output
!T2Q 40 Timer2 inverted output
Sleeping 41 Sleeping function activated
Crane Deviat 42 Tripped on deviation
PumpSlave1 43 Activate pump slave 1
PumpSlave2 44 Activate pump slave 2
PumpSlave3 45 Activate pump slave 3
PumpSlave4 46 Activate pump slave 4
PumpSlave5 47 Activate pump slave 5
PumpSlave6 48 Activate pump slave 6
PumpMaster1 49 Activate pump master 1
PumpMaster2 50 Activate pump master 2
PumpMaster3 51 Activate pump master 3
PumpMaster4 52 Activate pump master 4
PumpMaster5 53 Activate pump master 5
PumpMaster6 54 Activate pump master 6
All Pumps 55 All pumps are running
Only Master 56 Only the master is running
Loc/Rem 57 Local/Rem function is active
Standby 58 Standby supply option is active
PTC Trip 59 Trip when function is active
PT100 Trip 60 Trip when function is active
Section 11-5