Table of Contents
Advertisement
Main Setup [200]
88
Com
2
Remote + Keyb
3
Com + Keyb
4
Rem+Keyb+Co
5
m
Option
6
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
Local/Remote key function [217]
The Toggle key on the keyboard, see section 9-2-5, page 70, has two func-
tions and is activated in this menu. As default the key is just set to operate as
a Toggle key that moves you easily through the menus in the toggle loop. The
second function of the key allows you to easily swap between Local and nor-
mal operation (set up via [214] and [215]) of the VSD. Local mode can also be
activated via a digital input. If both [2171] and [2172] is set to Standard, the
function is disabled.
Default:
Standard
0
Remote
1
Keyboard
2
Com
3
Communication information
Modbus Instance no/
DeviceNet no:
Profibus slot/index
EtherCAT index (hex)
Fieldbus format
Modbus format
Default:
Standard
0
Remote
1
Keyboard
2
Com
3
The command comes from the serial communication (RS
485, Fieldbus).
The command comes from the inputs of the terminal strip
(terminals 1-22) or the keyboard.
The command comes from the serial communication
(RS485, Fieldbus) or the keyboard.
The command comes from the inputs of the terminal strip
(terminals 1-22), the keyboard or the serial communication
(RS485, Fieldbus).
The command comes from an option. Only available if the
option can control the reset command.
43016
168/175
4bc8
UInt
UInt
2171 LocRefCtrl
Stp
Standard
A
Standard
Local reference control set via [214]
Local reference control via remote
Local reference control via keyboard
Local reference control via communication
43009
168/168
4bc1
UInt
UInt
2172 LocRunCtrl
Stp
Standard
A
Standard
Local Run/Stop control set via [215]
Local Run/Stop control via remote
Local Run/Stop control via keyboard
Local Run/Stop control via communication
Section 11-2
Advertisement
Table of Contents
