Table of Contents
Advertisement
Standards
Options
Option board
position 3
Option board
Fieldbus
position 4
Liquid Cooling
Standard
Marine
Cabinet input options
Cabinet output options
Additional options
1-4
Standards
1-4-1
Product standard for EMC
"?" = No option
"I" = Encoder
"J" = PTC/PT100
"K" = Extended I/O"
"?" = No option
"L" = DeviceNet
"M" = Profibus-DP
"M1" = Profinet
"N" = RS232/485
"O" = EtherNet Modbus TCP
"O1" = EtherCAT
"?" = No Liquid Cooling
"P" = Liquid Cooling
"?" = IEC
"Q" = UL
"?" = No marine option
"R" = Marine option included
"?" = No cabinet input options
"S" = Main switch included
"T" = Main contactor included
"U" = Main switch + contactor included
"?" = No cabinet output options included
"V" = dU/dt filter included
"W" = dU/dt filter + Overshoot clamp included
"X" = Sinus filter included
"X1" = All-pole sinus filter included
"Z1"= Common mode output filter
"Z2"= Cable Gland kit
"Z3"= Motor PTC connection
Options only available for model between 0.37 and 37KW
The variable speed drives described in this instruction manual comply with the
standards listed in Table 2. For the declarations of conformity contact your
supplier for more information.
Product standard EN(IEC)61800-3, defines the:
First Environment (Extended EMC) as environment that includes domestic
premises. It also includes establishments directly connected without interme-
diate transformers to a low voltage power supply network that supplies build-
ings used for domestic purposes.
Category C2: Power Drive System (PDS) of rated voltage<1.000 V, which is
neither a plug in device nor a movable device and, when used in the first envi-
ronment, is intended to be installed and commissioned only by a professional.
Second environment (Standard EMC) includes all other establishments.
Category C3: PDS of rated voltage <1.000 V, intended for use in the second
environment and not intended for use in the first environment.
Category C4: PDS or rated voltage equal or above 1.000 V, or rated current
equal to or above 400 A, or intended for use in complex systems in the sec-
ond environment.
The variable speed drive complies with the product standard
EN(IEC) 61800-3:2004 (Any kind of metal screened cable may be used). The
standard variable speed drive is designed to meet the requirements according
to category C3.
Letter ("?" means no character)
Section 1-4
9
Advertisement
Table of Contents
