Download Print this page

Section 5: Diagnostic Commands; Viewing Connectivity Settings And Options; Module Identification Displays; Gsm Status Displays - Honeywell AlarmNet GSMBR Installation And Setup Manual

Communications module
Hide thumbs

Advertisement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Viewing Connectivity Settings and Options

The 7720P Programming Tool can be used to quickly view the connectivity settings and
options. Most commands require you to press the [Shift] key and then the designated
command key. (See the red keys on the 7720P Programming Tool.)

Module Identification Displays

[A]
[B]
[C]

GSM Status Displays

[E]
7845iGSM
x.x.xx
mm/dd/yy
MAC
xxxxxxxxxxxx
MAC CRC
yyyy
SCID xxxxx xxxxx
xxxxx xxxxx
IMEI
xxxxxxxx
xxxxxx x
Mon 01 Jan 2001
05:48:39 am
PriRSSI GPRS REG
-xxxdbm
x
x
Diagnostic Commands
Software Revision
"x.x.xx" indicates the installed software Revision.
Mm/dd/yy indicates month, day and year of the
revision.
MAC Address
"xxxxxxxxxxxx" indicates the module's unique
identification number.
"yyyy" indicates the MAC CRC number. This number
is also found on the label on the module, as well as the
label on the box.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
SCID Display
Displays the identification number assigned to the SIM
card (SCID) in this device.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the
communications module in this device.
Press the [Space] key to get the MAC Address.
Press the backspace [BS] key to go to the previous field.
Time
Retrieves the current date and time from the AlarmNet
network in Greenwich Mean Time (GMT). This display
confirms that the module is in sync with network.
GSM Status Display Screen 1
PriRSSI – Primary Site RSSI level in dBm
GPRS
– GPRS Service availability where "x" can be:
"Y" if GPRS is available
"N" if GPRS is Not available
REG
– Registration status from radio module where
"x" can be:
N – Not Registered
H – Registered Home
S E C T I O N
5
5-1

Advertisement

loading

  Related Manuals for Honeywell AlarmNet GSMBR

This manual is also suitable for:

Alarmnet igsmbr