Section 5: Programmer Keyboard Commands; Module Identification Displays - Honeywell AlarmNet IGSMHS Installation And Setup Manual

                                                
Programmer keyboard commands can be used to quickly view your connectivity settings and
options. Most commands require you to press the [Shift] key and then the designated
command key. (See the keys designated in red on the 7720P Programming Tool.)
[A]
7845iGSMHS
x.x.xx

Module Identification Displays

[B]
MAC xxxxxxxxxxxx
MAC CRC
NOTE: The SCID and IMEI are only displayed if the Comm Path Choice is "IP&GSM" or "GSM".
SCID xxxxx xxxxx
xxxxx xxxxx
IMEI xxxxxxxx
xxxxxx x
[C]
Mon 01 Jan 2011
05:48:39 am
NOTE: The Physical Link and NIC IP Address is only displayed if the Comm Path Choice is "IP&GSM" or "IP".
[D]
Physical Link
Good/Bad
NIC IP Address
xxx.xxx.xxx.xxx
Programmer Keyboard Commands
Software Revision
"x.x.xx" indicates the installed software Revision.
mm/dd/yy
Mm/dd/yy indicates month, day and year of the revision.
 If the IP & GSM comm path is selected, the sign-on will be
"7845iGSMHS"
 If the IP comm path is selected, the sign-on will be "7845iHS"
 If the GSM comm path is selected, the sign-on will be "7845GSMHS"
MAC Address
"xxxxxxxxxxxx" indicates the IGSMHS's unique identification number.
yyyy
"yyyy" indicates the MAC CRC number. This number is found on the
label on the module, and a label on the box.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
SCID Display
Displays the identification number assigned to the SIM card (SCID) in
this device.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the IGSMHS module in
this device.
Press the [Space] key to get the MAC Address.
Press the backspace [BS] key to go to the previous field.
Time
Retrieves the current date and time from the AlarmNet network in
Greenwich Mean Time (GMT). This display confirms that the module is
in sync with network.
Network Diagnostics Display
Indicates whether the device has detected a physical connection to the
internet.
Press the [Space] key to go to the next field.
IP Information Display
Displays the IP address assigned to this device.
Press the [Space] key to go to the next field.
S E C T I O N 5
5-1