Mgt Transceivers And Reference Clocks - Xilinx KCU1250 User Manual

MGT Transceivers and Reference Clocks

The KCU1250 board provides access to all GTH transceiver and reference clock pins of the
XCKU040 FPGA, as shown in
four RX-TX lanes, referred to as a quad (Q224 - Q228).
Figure 1-12
IMPORTANT:
QUAD 131 and QUAD 132 are not available on the XCKU040 FPGA.
X-Ref Target - Figure 1-12
KCU1250 User Guide
UG1057 (v1.0) December 19, 2014
Chapter 1: KCU1250 Board Features and Operation
Figure 1-12. The MGT transceivers are grouped into five sets of
is for reference only and might not reflect the current revision of the board.
Figure 1-12: MGT Quad Locations
www.xilinx.com 28
Send Feedback