Xilinx KCU1250 User Manual page 71

- Read the Selected INA226 Registers
KCU1250 System Controller
-----------------------------
1. Get SHUNT Register
2. Get BUS Register
3. Get POWER Register
4. Get CURRENT Register
5. Get CALIBRATION Register
6. Get MASK_ENABLE Register
7. Get ALERT_LIMIT Register
8. Get CONFIGURATION Register
9. Get DIE ID Register
0. Return to Previous Menu
- Set the Selected INA226 Registers
KCU1250 System Controller
-----------------------------
1. Set CALIBRATION Register
2. Set MASK_ENABLE Register
3. Set ALERT_LIMIT Register
4. Set CONFIGURATION Register
0. Return to Previous Menu
FPGA Mezzanine Card Menu
The KCU1250 board includes three FPGA mezzanine card (FMC) ANSI/VITA 57.1 expansion
interfaces. All FMC cards must host an IIC EEPROM that can be read through the FMC menu.
A raw hexadecimal display and a formatted version of the FMC EEPROM data are provided
through the FMC menu. The VITA 57.1 standard identifies the data fields of the intelligent
platform management interface (IPMI) specification used for the FMC EEPROM. The
KCU1250 board system controller supports the programmable clock resources on these
FMC modules:
These FMC modules are not included.
IMPORTANT:
• FMC XM101 LVDS QSE card
• FMC XM104 MGT serial connectivity card
• FMC XM105 debug card
• FMC XM107 loopback card
KCU1250 User Guide
UG1057 (v1.0) December 19, 2014
- RAIL INA226 Menu -
- RAIL INA226 Menu -
www.xilinx.com
Appendix D: System Controller
Send Feedback
71