Xilinx KCU1250 User Manual page 75

FPGA CONFIG Menu
The system controller CONFIG menu is used to configure the KCU1250 board UltraScale
FPGA from an SD card (callout 7). The directory structure and content of the SD card must
adhere to the data format specified in Xilinx XAPP1229. One of 16 bitstreams can be
selected for use by the configuration engine by setting a binary encoded value on the
system controller mode DIP switch SW13 (see
Switches).
CONFIG Menu Options
KCU1250 System Controller
- CONFIG Menu -
-----------------------------
1. Configure UltraScale FPGA from SD Card
0. Return to Main Menu
• Configure UltraScale FPGA from microSD Card
Info: Xilinx.sys opened
Info Configuration definition file "kcu1250/set0/config.def" opened
Info: Clock divider is set to 2
Info: Total 1 device(s) in the chain
Info: Total 1 configuration target(s) in the chain
Info: Configuring target(s)...
Info: Bitfile "kcu1250/set0/kcu1250_leds.bit" opened
...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Configuration completed successfully
• Return to Main Menu
This option returns to the menu level above.
KCU1250 User Guide
UG1057 (v1.0) December 19, 2014
System Controller Configuration DIP
www.xilinx.com
Appendix D: System Controller
Send Feedback
75