Installing Or Updating Device Drivers After Installing Netware; Updating The Device Drivers; Installing The Device Drivers - Adaptec SATA RAID FOR Manual

Installing or updating device drivers after
installing NetWare
To update the driver in an existing NetWare 6.5 system see
Updating the Device
NetWare system, see

Updating the Device Drivers

1 From the system console, type the following and press Enter
then:
Unload driver_name
where
driver_name is AARICH or AAR81XX
For example:
Unload AARICH
2 Do not restart the system; continue with the instructions for
Installing the Device

Installing the Device Drivers

1 Start the NetWare hdetect utility program. From the system
console, type the following then press Enter:
load hdetect
2 Insert the HostRAID support diskette for Novell NetWare into
the floppy diskette drive.
3 When you see the prompt
, select Yes then press Enter to continue.
anyway?
4 The device driver window opens, showing a list of storage
adapters. Select Modify.
5 Press Enter to continue then select Modify.
6 Select the driver then press the Delete key to delete it.
7 When the next window opens, press the Insert key twice to add
a driver.
Drivers. To install the driver in an existing
Installing the Device
Drivers.
Sys volume not mounted. Load driver
Installing the Driver
Drivers.
2-7