Installing The Aro-1130Ca And Connecting Scsi Devices - Adaptec ARO-1130CA Installation And Hardware Manual

Installing the ARO-1130CA
and Connecting SCSI
Devices
This chapter explains how to install your hardware. To install the
ARO-1130CA and devices, you must
Verify presence of DIMM memory
Back up any existing data on drives to be used in array
Install the ARO-1130CA in your system
Connect SCSI devices to system's RAIDport II motherboard
SCSI channels
Note:
If another Adaptec host adapter is already installed in
the computer system, you may need to make some changes
to the Windows NT configuration. See Using the
ARO-1130CA with Other Adaptec Products on page 1-2 for
more information.
2
2-1