Adaptec DuraStor 7220SS User Manual page 21

To add a partition:
1 From the System Menu, select Array Menu and press Enter.
The Select Array menu appears.
2 Select the multiple-partition array you want and press Enter.
That array's Array menu appears.
3 Select Add a Partition and press Enter.
The Select Free Partition menu appears with a list of free
partitions. A free partition is free space that has not yet been
partitioned or space that had a partition that was deleted.
4 Select the free partition you want to use.
The Remaining Size prompt appears.
5 Type the size you want the partition to be and press Enter.
The Partition Name window appears.
6 Type a name for the partition and press Enter.
You can use up to 35 characters. You can include any characters
in the name, including spaces. If you do not want to name the
partition, press Enter. You can add or change the name later.
The LUN prompt appears.
7 Type the LUN for the partition and press Enter.
The LUN that appears is the suggested default LUN assignment.
See Step 4 on
The system warns you about the LUN for Unix and Macintosh
OSs. (See the Note on
Enter and the system asks if you want to be warned again. Select
No to avoid receiving this warning again, otherwise select Yes
to be warned the next time you create a partition.
The system confirms that you want to make the change.
8 Select Yes and press Enter.
Creating and Managing Arrays and Partitions
page 2-3 for more information on LUNs.
page 2-2 for detailed information.) Press
2-10