Deleting An Array - Adaptec DuraStor 7220SS User Manual

9 Select Yes and press Enter.
The array will be back online
Note: If the array does not come back online, too many
members may be offline or the array may have additional
failures on the bus or enclosure that Trust Array Function
cannot fix.

Deleting an Array

You can delete an array when you no longer need the array or you
need the disk drives for another use.
Caution: When you delete an array, you delete all partitions
!
and data contained in the array; however, before reusing
the disk drives you should perform a low-level format on
them.
Note: You cannot delete an array while any utility is
running on the array. You must stop the utility, if possible,
or let it finish, before you can delete the array.
To delete an array:
1 From the System Menu, select Delete an Array and press Enter.
The Select Array menu appears.
2 Select the array you want to delete and press Enter.
The system asks you to confirm the deletion.
3 Select Yes and press Enter.
Creating and Managing Arrays and Partitions
2-21