Note:
If you do not want to view the user interface, we
recommend launching it as a status-bar icon (see page
3-20 for details).
4
Select the defaults or click OK to save these settings.
Configuring Email
If you check the Email checkbox and click on the Configure email
option the Connection Settings dialog box appears, as shown in
Figure 3-6
Figure 3-6. Connection Setting Dialog Box
1
In the Internet Connection Settings you can select a Direct
connection (non-modem) or a Dial-up connection (modem). To
enable the Dial-up connection, your system must have
Windows Dial-Up Networking (DUN) installed.
If you select a Dial-up connection (modem), you must
enter a User Name and the correct password in the Dial-
Up Entry Properties box.
In the Dial-Up Entry Setup box, select a dial-up entry
from the list. Click the Create New button if you want to
create a new entry. If you want to change an existing
entry, click the Configure button.
2
Complete the Identity section with the correct email address,
Outgoing mail (SMTP) server (optional) and Organization
(optional) information.
Entering and Viewing System Information
3-13