Changing The Utility Priority - Adaptec DuraStor 7220SS User Manual

4
While the controller reboots, hold down the Spacebar on your
keyboard.
The Flash Utility screen appears.
5
Press 6 for the Utility menu.
The Utility menu appears.
6
Press 4 for Battery Life Monitor Options.
The Battery Life Monitor menu appears.
7
Press the letter of the option you want:
– A. New Battery Installed—Use this option to reset the
battery age to zero when you install a new battery. The
system confirms that you want to install a new battery and
resets the battery age. Press Y and Enter to make the change.
– B. Set Battery Age—Use this option to set a specific age when
you install a battery from another controller. The system
prompts you to type the age of the current battery (in
months). Type the number of months and press Enter. The
system confirms the new age. Press Y and Enter to make the
change.
– C. Disable Battery Life Monitor—Use this option to
completely disable the Battery Life Monitor function. We do
not recommend using this option.
8
Press q to return to the Utility menu.
9
Press x to reboot the controller.

Changing the Utility Priority

You can change the priority at which utilities run when there are
active I/O operations competing for the controller's CPU. The
priority settings are:
High (default)—Use if your highest priority is to get the array
I
back to a fully fault-tolerant state. At this setting, heavy I/O
with the host is slower than normal.
Medium
I
Configuring the Controller
5-20