Adaptec DuraStor 7220SS User Manual page 42

Below is a list of some of the key warning and failure events
included in the event log during operation:
Disk detected error
I
Disk channel error
I
Battery failure
I
Drive down
I
Power up
I
Array critical
I
Array offline
I
Temperature warning
I
Temperature failure (this leads to a shutdown which is also
I
logged)
Voltage warning
I
Voltage failure (this leads to a shutdown which is also logged)
I
The event log stores the most recent 400 events. Events are
numbered sequentially from 001 to 999. The numbering wraps
back to 001 after reaching 999.
Note: If you are having a problem with the controller or an
array, check the event log before calling technical support.
Event messages may let you resolve the problem on your
own. You should also check
You can view the event information three ways:
Most recent event
I
One event at a time, most recent event first
I
Full screen of events
I
You can also capture the event log to a file. See
Log File on page 3-4.
Monitoring System Status
Chapter 7, Troubleshooting.
Capturing the Event
3-2